Drumtwister fluted flange
Pentre Group fluted flange drums for drumtwisting are manufactured to meet the particular demands of drumtwisting operations. They are available in a wide range of metric and imperial flange diameters from 1000mm upwards, to DIN standards or to your own drawings.
The fluted flange design is lighter than our flat sided Drumtwister drum for the same flange diameter, and our in-house design team will adapt the drum to your line and process.
Options
Available on request. Specify your exact lifting points and we will manufacture to suit.
- Non standard sizes
- Stainless steel, aluminium or galvanised steel
- Perforated flanges and barrels for curing processes
- Statically balanced
- Removable or hardened centre bosses
- Specified lifting points or rim lifting, with lifting beams to suit
- Flange inner faces lined with steel or stainless steel sheet
- Entry slot in flange
- Special surface finishes
Suitable for use across all sectors of the wire and cable industry, on drumtwisting and stranding lines.
Specifications
Manufactured from certified materials and MIG welded to qualified procedures and by qualified welders under ASME IX and AWS D1.1. Engineered to carry the loads imposed by the specified operation. Drums are finished in our standard paints or in customer specified colours.
Technical data
Standard sizes are listed below. Non standard sizes, bores and drive arrangements are available on request.

Key. d1 flange diameter, d2 barrel diameter, d3 outside diameter, d4 bore diameter, d5 drive hole or pin diameter, e1 drive radius, l1 through bore, l2 traverse. All dimensions in mm.
| Product code | d1 | d2 | d3 | d4 | d5 | e1 | l1 | l2 |
|---|---|---|---|---|---|---|---|---|
| DT/1000 | 1000 | 500 | 102 | 80 | 40 | 160 | 750 | 630 |
| DT/1120 | 1120 | 560 | 102 | 80 | 40 | 160 | 850 | 710 |
| DT/1250 | 1250 | 630 | 102 | 80 | 40 | 160 | 950 | 800 |
| DT/1400 | 1400 | 710 | 102 | 80 | 63 | 300 | 1060 | 900 |
| DT/1600 | 1600 | 800 | 102 | 80 | 63 | 300 | 1180 | 1000 |
| DT/1800 | 1800 | 1000 | 125 | 100 | 63 | 300 | 1320 | 1120 |
| DT/2000 | 2000 | 1120 | 125 | 100 | 63 | 300 | 1500 | 1250 |
| DT/2240 | 2240 | 1250 | 160 | 125 | 63 | 300 | 1700 | 1400 |
| DT/2500 | 2500 | 1500 | 160 | 125 | 63 | 300 | 1900 | 1600 |
| DT/2800 | 2800 | 1800 | 185 | 140 | 63 | 300 | 2120 | 1800 |
All measurements and weights as stated on this drawing are approximate figures. Tolerances and deviations as customary in this trade are reserved.
Key. Ksr run out of barrel, radial. Ssr run out of flange, radial. Ssx run out of flange, axial. All run-out values in mm.
| Product code | Load (kg) | Ksr | Ssr | Ssx |
|---|---|---|---|---|
| DT/1000 | 1000 | 3.0 | 3.0 | 3.0 |
| DT/1120 | 1500 | 3.0 | 4.0 | 3.0 |
| DT/1250 | 2000 | 4.0 | 5.0 | 4.0 |
| DT/1400 | 3000 | 5.0 | 5.0 | 4.0 |
| DT/1600 | 4000 | 5.0 | 5.0 | 6.0 |
| DT/1800 | 5500 | 6.0 | 7.0 | 7.0 |
| DT/2000 | 7500 | 7.0 | 7.0 | 7.0 |
| DT/2240 | 10500 | 9.0 | 9.0 | 9.0 |
| DT/2500 | 14000 | 9.0 | 9.0 | 9.0 |
| DT/2800 | 18000 | 9.0 | 11.0 | 12.0 |
All measurements and weights as stated on this drawing are approximate figures. Tolerances and deviations as customary in this trade are reserved.