Drumtwister flat sided
Pentre Group flat sided Drumtwister drums are specifically manufactured to meet the demands of drumtwisting operations and are available in a wide range of both metric and imperial flange diameters, from 1000mm upwards. Drums are manufactured to DIN 46395, DIN 46391, or to your own bespoke requirements.
Our in-house design team adapts each drum to your line and process, and looks for ways to take cost out of the design.
Options
- Non standard sizes available
- Manufactured in stainless steel, aluminium or galvanised steel
- Perforated flanges and barrels for all curing processes
- Statically balanced
- Removable or hardened centre bosses to exact requirements
- Specified lifting points, or rim lifting, with lifting beams designed and manufactured to suit
- Custom design drive arrangements
- Neoprene lined winding surface
- Entry slot-in flange
- Special surface finishes are available
Suitable for use across all sectors of the wire and cable industry.
Specifications
All Pentre Group drums are manufactured from certified materials and MIG welded to qualified procedures and by qualified welders under ASME IX and AWS D1.1.
Precision engineered to meet all loads imposed by specified operations, this flat sided design is heavier than our fluted flange Drumtwister drum.
Drums are finished in our standard paints or customer specified colours.
Technical data
Standard sizes are listed below. Non standard sizes, bores and drive arrangements are available on request.

Key: d1 = flange diameter; d2 = barrel diameter; d3 = outside diameter; d4 = bore diameter; d5 = drive hole / pin diameter; e1 = drive radius; L1 = through bore; L2 = traverse.
| Product code | d1 | d2 | d3 | d4 | d5 | e1 | L1 | L2 |
|---|---|---|---|---|---|---|---|---|
| FDT/1000 | 1000 | 500 | 102 | 80 | 40 | 160 | 750 | 630 |
| FDT/1120 | 1120 | 560 | 102 | 80 | 40 | 160 | 850 | 710 |
| FDT/1250 | 1250 | 630 | 102 | 80 | 40 | 160 | 950 | 800 |
| FDT/1400 | 1400 | 710 | 102 | 80 | 63 | 300 | 1060 | 900 |
| FDT/1600 | 1600 | 800 | 102 | 80 | 63 | 300 | 1180 | 1000 |
| FDT/1800 | 1800 | 1000 | 125 | 100 | 63 | 300 | 1320 | 1120 |
| FDT/2000 | 2000 | 1120 | 125 | 100 | 63 | 300 | 1500 | 1250 |
| FDT/2240 | 2240 | 1250 | 160 | 125 | 63 | 300 | 1700 | 1400 |
| FDT/2500 | 2500 | 1500 | 160 | 125 | 63 | 300 | 1900 | 1600 |
| FDT/2800 | 2800 | 1800 | 185 | 140 | 63 | 300 | 2120 | 1800 |

Key: Ksr = run out of barrel radial; Ssr = run out of flange radial; Ssx = run out of flange axial.
| Product code | Load | Ksr | Ssr | Ssx |
|---|---|---|---|---|
| FDT/1000 | 1000 | 3 | 3 | 3 |
| FDT/1120 | 1500 | 3 | 4 | 3 |
| FDT/1250 | 2000 | 4 | 5 | 4 |
| FDT/1400 | 3000 | 5 | 5 | 4 |
| FDT/1600 | 4000 | 5 | 5 | 6 |
| FDT/1800 | 5500 | 6 | 7 | 7 |
| FDT/2000 | 7500 | 7 | 7 | 7 |
| FDT/2240 | 10500 | 9 | 9 | 9 |
| FDT/2500 | 14000 | 9 | 9 | 9 |
| FDT/2800 | 18000 | 9 | 11 | 12 |