Pentre Group

Drumtwister fluted flange

Drumtwister fluted flange steel drum

Drumtwister fluted flange

Pentre Group fluted flange drums for drumtwisting are manufactured to meet the particular demands of drumtwisting operations. They are available in a wide range of metric and imperial flange diameters from 1000mm upwards, to DIN standards or to your own drawings.

The fluted flange design is lighter than our flat sided Drumtwister drum for the same flange diameter, and our in-house design team will adapt the drum to your line and process.

Options

Available on request. Specify your exact lifting points and we will manufacture to suit.

Suitable for use across all sectors of the wire and cable industry, on drumtwisting and stranding lines.

Specifications

Manufactured from certified materials and MIG welded to qualified procedures and by qualified welders under ASME IX and AWS D1.1. Engineered to carry the loads imposed by the specified operation. Drums are finished in our standard paints or in customer specified colours.

Technical data

Standard sizes are listed below. Non standard sizes, bores and drive arrangements are available on request.

Product dimensions

Dimension diagram for Drumtwister fluted flange drum

Key. d1 flange diameter, d2 barrel diameter, d3 outside diameter, d4 bore diameter, d5 drive hole or pin diameter, e1 drive radius, l1 through bore, l2 traverse. All dimensions in mm.

Product coded1d2d3d4d5e1l1l2
DT/100010005001028040160750630
DT/112011205601028040160850710
DT/125012506301028040160950800
DT/1400140071010280633001060900
DT/16001600800102806330011801000
DT/1800180010001251006330013201120
DT/2000200011201251006330015001250
DT/2240224012501601256330017001400
DT/2500250015001601256330019001600
DT/2800280018001851406330021201800

All measurements and weights as stated on this drawing are approximate figures. Tolerances and deviations as customary in this trade are reserved.

Key. Ksr run out of barrel, radial. Ssr run out of flange, radial. Ssx run out of flange, axial. All run-out values in mm.

Product codeLoad (kg)KsrSsrSsx
DT/100010003.03.03.0
DT/112015003.04.03.0
DT/125020004.05.04.0
DT/140030005.05.04.0
DT/160040005.05.06.0
DT/180055006.07.07.0
DT/200075007.07.07.0
DT/2240105009.09.09.0
DT/2500140009.09.09.0
DT/2800180009.011.012.0

All measurements and weights as stated on this drawing are approximate figures. Tolerances and deviations as customary in this trade are reserved.

Talk to our product specialists about Drumtwister drums

Steel drums

Need a
bespoke
solution?

Download our brochure